This release contains version 3.00 beta and is all that is being offered
 now for those registering version 2.07 until i get the 3.00 completed to
 my specs..

     The file "cvrtumb.exe" is used to convert existing thumb prints
  to 64k or back to 32k colour levels..

   the 64k drivers will only work in the FSCAN.EXE release

   If your using a video card with an ET4000 chip set on it? then you
   must use the TSG256.BIN, TSG32k.BIN or TSG64k.bin video driver..
   Robot 72c is now working properly...
     
    Try not to intermix the "FAX.EXE" with "FSCAN.EXE" using the 
    same FAX480.CFG
     Run them in different directorys that each will have there
    own set up file..


      The sweep speeds of the AVT 90 and Black&white modes have been
     changed, make sure you re'enter your clock freq the same as it is
     now to make the effects take place in the back ground of the
     program, PROSKAN does not automaticly do this when the program
     starts to avoid conflict with older versions.

       You will have to manually adjust the Mode 2 timer for the AVT90
      and BlK&White modes after, unless you make a note of all your
      current mode 2 timer slant settings then use the quick set once,
      then check all the values of the other modes to tweak team 
      back into there proper values.

      
  Registered users of 2.07 will be getting the Beta 3.00 until the 
   version 3.00 is complete to my spec's, then the price of this 3.00
   will be $40.00 and it will be the last Major  Dos version i'll make 
   other then minor changes and bug fixes.


     i expect a windows program at the end of the year or sooner. All newly 
     registered owers of 3.00 final release will be  getting a  %50 percent 
     discount on the price, i am not sure at this time just what the 
     finale price will be, But i would say that my most recent thinking
     has been less then the $100 dollar mark...
 

     Thank you very much for reading this and hope your many hours of
   SSTV are an enjoyable one...

      73's
       Address:

           Maynard Philbrook (KA1LPA)
           520 Pleasant St.
           Willimantic, CT 06226